Case Study Solutions GEN2 T-A® Case Study: Industry: Part: Material: Holder: Insert: Depth: Diameter: 1115 Structural Steel/Fabricator Structural Steel Plates A36 Structural Steel 0.875” (22.2mm) 1.0” (25.4mm) 4C11H-0028 23015S-100F Allied Machine Solution GEN2 T-A • 725 RPM • 0.0083 IPR (0.2 mm/rev) • Resulted in 6 IPM (152 mm/min) • Cycle time = 10 seconds • Tool life = 1,150 holes Previous Tooling Kennametal KenTIP Drill • 630 RPM • 0.0067 IPR (0.170 mm/rev) • Resulted in 4.2 IPM (96 mm/min) • Cycle time = 14.3 seconds • Tool life = 1,000 holes The Advantages The GEN2 T-A Drilling System made a significant difference for the customer. The customer was impressed that the less expensive Allied drill outperformed the much higher priced Kennametal tool. • Reduced cycle time

Join for free to read