Case Study Solutions GEN2 T-A® Case Study: Industry: Part: Material: Holder: Insert: Depth: Diameter: 1103 Structural Steel/Fabricator Structural Steel Tubes Structural Steel 0.709” (18.00 mm) 13.15” (334mm) 451H-18 Special Length Holder Allied Machine Solution GEN2 T-A • 800 RPM • 0.010 IPR (0.26 mm/rev) • Resulted in 8.19 IPM (208.00 mm/min) • Cycle time = 1.7 seconds • Tool life = 4,000 holes Previous Tooling Sandvik 880 Drill • 800 RPM • 0.004 IPR (0.10 mm/rev) • Resulted in 3.15 IPM (80.00 mm/min) • Cycle time = 4.4 seconds • Tool life = 2,100 holes The Advantages The GEN2 T-A provided the reliable solution the customer needed. • Reduced the machine run-time from 4.4 to 1.7 seconds • Time savings of 61.3% • Reduced cost-per-hole from $0.14 to $0.11 • Total dolla

Join for free to read