Case Study Solutions GEN2 T-A® Case Study: Industry: Part: Material: Holder: Insert: Depth: Diameter: 1105 Heavy Equipment V35 Vane Pump Ring 52100 Steel 0.984” (25mm) 2.5 inches (63.5mm) 452H-25 22020S-125F Allied Machine Solution GEN2 T-A • 1200 RPM • 0.012 IPR (0.30 mm/rev) • 14.4 IPM (365.76 mm/min) • Cycle time = 10 seconds • Tool life = 104 holes Previous Tooling KSEM drill with insert grade KC 7315 HP (M) • 1200 RPM • 0.012 IPR (0.30 mm/rev) • 14.4 IPM (365.76 mm/min) • Cycle time = 10 seconds • Tool life = 40 holes The Advantages The GEN2 T-A Drilling System made a significant difference for the customer • Increased tool life nearly 3x compared to the KSEM tool • Eliminated catastrophic failures • Reduced the cost-per-hole from $2.59 to $0.71 • Total savings of 72.6

Join for free to read